YJS-501 bonded steel plastic 
 Product characteristics and uses: 
 YJS-501 stick steel, rubber modified epoxy adhesive solvent chemical dimerization reaction is suitable for reinforced concrete flexural large partial 
 Heart compression and tension members bonded steel plates reinforcement works. 
 How to use: 
 Steel 1, the YJS-501 stick glue Group A, B component were used to drill to stir both in order to avoid precipitation during storage lead with the 
 Ratio error, the curing time. 
 2, the YJS-501 stick reinforced plastic Group A were: B = 3:1 mixing ratio, mixing evenly, you can use. 
 Note: 
 1, when the temperature is low, can be Group A, B, respectively, in 60 ~ 80 ℃ warm water pot (bucket) temperature, in order to reduce the viscosity. 
 2, the construction of the ambient temperature should be below 60 ℃, room temperature, the initial setting time of 1.5 hours, one day at room temperature to fully cure in the negative 
 Temperature or moisture curing time longer. 
 Storage and transport: 
 The product can be stored below 40 ℃ ambient temperature, the shelf life of 24 months. 
 2, the product is solvent, storage should be away from open flame heating device.