YJS-503 potting compound 
 - Modification of unsaturated epoxy resin grade plastic 
 Product characteristics and uses: 
 YJS-503 perfusion glue solvent chemical dimerization reaction of modified epoxy resin is a large flowing adhesive. Need to substantially improve the section carrying capacity and seismic capacity of reinforced concrete beams and columns structure outside sticky steel (angle iron or channel) reinforcement works. 
 How to use: 
 YJS-503 perfusion glue Group A and Group B were, respectively, with an electric drill Stir well to avoid precipitation during storage lead with 
 Ratio error, the curing time. 
 2, the YJS-503 perfusion plastic Group A: Part B = 3:1 mixing ratio, mixing evenly, you can use. 
 Note: 
 1, when the temperature is low, can be Group A, B, respectively, in 60 ~ 80 ℃ warm water pot (bucket) temperature, in order to reduce the viscosity. 
 2, construction of the ambient temperature should be below 60 ℃, room temperature, initial setting time of 1.5 hours at room temperature the next day fully cured, the negative temperature 
 Or wet conditions, curing time longer. 
 Storage and transport: 
 The product can be stored below 40 ℃ ambient temperature, the shelf life of 24 months. 
 2, the product is solvent, storage should be away from open flame heating device.